Sale Price:
$419.00
Original Price:
$419.00
Shure Beta 27 Condenser Microphone — Precision Small-Diaphragm Design for Live and Studio Use
The Shure Beta 27 is a professional small-diaphragm condenser microphone engineered for accurate, detailed capture of acoustic instruments and drum overheads in both live and studio environments. Built to deliver a natural, focused sound with excellent transient response, the Beta 27 excels on acoustic guitar, piano, cymbals, strings, brass, and percussion.
Features:
Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
Premium electronic components and gold-plated internal and external connectors
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend
-15 dB switchable attenuator handles extremely high SPLs with ease
Internal pop filter with three separate mesh layers reduces wind and breath noise
Transparent, accurate reproduction with a slight presence lift that helps instruments cut through a mix without sounding colored.
Smooth top end that captures cymbal shimmer and string detail without harshness.
Tight, controlled low end that keeps acoustic sources defined and prevents muddiness.
The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.
Specs:
Type: Condenser (externally biased)
Frequency Response: 20 to 20,000 Hz
Polar Pattern: Supercardioid
Impedance: 160 Ohms
Sensitivity (at 1 kHz, open circuit voltage): -37 dBV/Pa
1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD)
1000 Ohm load: 134 dB (148 dB, Pad on)
2500 Ohm load: 140 dB (154 dB, Pad on)
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 85.5 dB
S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
Dynamic Range (at 1 kHz):
1000 Ohm load: 125.5 dB
2500 Ohm load: 131.5 dB
Common Mode Rejection (20 Hz to 20 kHz): > 50 dB
Clipping Level (20Hz-20 kHz at 1% THD)
1000 Ohm load: 2.0 dBV
2500 Ohm load: 8.5 dBV
THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
Self Noise (typical, equivalent SPL, A-weighted): 8.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: Net: 428 g (15.1 oz.)
Switch: Attenuator: -15 dB
Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
Connector: Three-pin professional audio (XLR), male
Power Requirements: 48 Vdc phantom, 5.6 mA
Why choose the Beta 27 The Beta 27 offers professional-grade accuracy and durability in a compact package, making it a versatile choice for engineers and performers who need dependable, detailed capture of acoustic instruments and drums. Its combination of transparent sound, focused cardioid pickup, and sturdy build makes it suitable for both touring rigs and critical studio sessions.
Model #BETA27
**Prof Erny’s and select vendors have partnered with select vendors to offer products that ship directly from the manufacturer or distributor centers directly to your door. This approach streamlines delivery, reduces extra handling by third‑party shippers, and provides customers with access to a broader selection of quality items that aren’t typically available locally. This particular item ships from warehouses in Berlin, Connecticut or Menifee, California**
Shure Beta 27 Condenser Microphone — Precision Small-Diaphragm Design for Live and Studio Use
The Shure Beta 27 is a professional small-diaphragm condenser microphone engineered for accurate, detailed capture of acoustic instruments and drum overheads in both live and studio environments. Built to deliver a natural, focused sound with excellent transient response, the Beta 27 excels on acoustic guitar, piano, cymbals, strings, brass, and percussion.
Features:
Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
Premium electronic components and gold-plated internal and external connectors
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend
-15 dB switchable attenuator handles extremely high SPLs with ease
Internal pop filter with three separate mesh layers reduces wind and breath noise
Transparent, accurate reproduction with a slight presence lift that helps instruments cut through a mix without sounding colored.
Smooth top end that captures cymbal shimmer and string detail without harshness.
Tight, controlled low end that keeps acoustic sources defined and prevents muddiness.
The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.
Specs:
Type: Condenser (externally biased)
Frequency Response: 20 to 20,000 Hz
Polar Pattern: Supercardioid
Impedance: 160 Ohms
Sensitivity (at 1 kHz, open circuit voltage): -37 dBV/Pa
1 Pascal=94 dB SPL
Maximum SPL (1 kHz at 1% THD)
1000 Ohm load: 134 dB (148 dB, Pad on)
2500 Ohm load: 140 dB (154 dB, Pad on)
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 85.5 dB
S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
Dynamic Range (at 1 kHz):
1000 Ohm load: 125.5 dB
2500 Ohm load: 131.5 dB
Common Mode Rejection (20 Hz to 20 kHz): > 50 dB
Clipping Level (20Hz-20 kHz at 1% THD)
1000 Ohm load: 2.0 dBV
2500 Ohm load: 8.5 dBV
THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
Self Noise (typical, equivalent SPL, A-weighted): 8.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight: Net: 428 g (15.1 oz.)
Switch: Attenuator: -15 dB
Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
Connector: Three-pin professional audio (XLR), male
Power Requirements: 48 Vdc phantom, 5.6 mA
Why choose the Beta 27 The Beta 27 offers professional-grade accuracy and durability in a compact package, making it a versatile choice for engineers and performers who need dependable, detailed capture of acoustic instruments and drums. Its combination of transparent sound, focused cardioid pickup, and sturdy build makes it suitable for both touring rigs and critical studio sessions.
Model #BETA27
**Prof Erny’s and select vendors have partnered with select vendors to offer products that ship directly from the manufacturer or distributor centers directly to your door. This approach streamlines delivery, reduces extra handling by third‑party shippers, and provides customers with access to a broader selection of quality items that aren’t typically available locally. This particular item ships from warehouses in Berlin, Connecticut or Menifee, California**
Image 1 of 13
Image 2 of 13
Image 3 of 13
Image 4 of 13
Image 5 of 13
Image 6 of 13
Image 7 of 13
Image 8 of 13
Image 9 of 13
Image 10 of 13
Image 11 of 13
Image 12 of 13
Image 13 of 13